Full Face Mask

Technical Information
Vision 3 The full face mask has been specially designed for use with all Scott air tube respirators, especially from professional firefighters, air-tube respirators and air line systems and escape breathing apparatus.
Vision 3 provides the user with a high level of comfort.
The body of the Vision 3 product line can be used in conjunction with the Scott Safety breathing sets.
It is produced according to EN 136 and has CE mark.
Scott will be certified to EN 137: 2002 Class II when used with propak series.
When used in conjunction with Scott AS1716 air line systems, it will be EN 139 certified.
Liquid silicone injection outer casing provides fit and comfort.
The ring-shaped visor provides excellent visibility.
The ring-shaped visor provides excellent visibility.
The SCOTT Vision 3 full face mask is available in 4 different sizes to fit the wide face structure and dimensions.
The full face mask is positive pressure and the outer face seal is made of liquid silicone rubber and the inner mask is made of EDME material.
The mask’s visor is made of scratches and impact-resistant polycarbonate coated with a multi-curved and burnt-delay coating.
Visor is placed in place with U-shaped flaps.
It is designed to allow the mask user to use it with glasses without preventing leakage.
The full face mask is available with a 5-point neoprene head belt or 2-point adjustable headbands with polyester or Kevlar TM net.
Full Face There is a bayonet connection on the left side of the mask for the introduction of the lung automaton.
Optionally, the right-hand port of the mask is also available if you want to install a communication kit.
The speech diaphragm mounted on the front of the mask provides a smooth speech and a low resistance exhalation valve that allows normal breathing without additional effort.
The full face mask is designed to be designed to minimize the risk of cross contamination in the secondary regulator, with separated exhalation and intake parts.